The fresh air system is used to ensure the quality of the indoor air environment, but the fresh air outlet for long-term use, the outlet will be due to electrostatic reasons in the air adsorption of dust in the air, dust is easy to breed bacteria, affecting the beauty and health. Therefore, the a need for proper maintenance of the fresh air system, and regular cleaning of the air outlet, to achieve the safe use of the fresh air machine.
How to maintain the fresh air system?
1. Cleaning the air outlet and filter
During the operation process, the air outlet and filter of the fresh air system will be due to electrostatic adsorption of dust in the air, over time the more dust accumulates, not only reducing the air filtration effect but also easy to breed bacteria, affecting health and aesthetics. Therefore, the fresh air system air outlet and filter should use special cleaning agents to clean regularly, to avoid dust clogging effect on the exhaust air effect.
High-efficiency filters can not be cleaned and can only be changed, the middle and junior filters according to the manufacturer's instructions, can be washed, and some can be sucked with a hoover, but cleaned once or twice after it is also recommended to replace. These filters are replaced or cleaned at least twice a year, and in areas with heavy haze pollution, to ensure a good filtration effect, they have to be replaced or cleaned in two or three months.
Remove the cabin door panel by unscrewing the four cabin door panels and fixing screws.
Clean and replace the fresh air system components.
After making sure that the cleaned and replaced parts are dry enough, refit the home fresh air system in the disassembled position and make sure it is installed in place.
Check whether there is any omission, after confirming that there is no error, fix the cabin door plate with fixing screws, and re-plug the power supply before you can use the domestic fresh air system again.
2. Wind speed and host wiring
Dust accumulation in the air ducts, pipe sealing performance to decline, which will lead to uneven air volume at each air outlet, affecting the use of the effect. For example, the new wind machine terminal board and power lines if used for a long time, will accumulate a lot of dust, or due to the vibration of the new wind machine leads to loose wiring, resulting in potential safety hazards. So the fresh air system should be regularly checked by professionals, adjust the airflow, eliminate hidden problems, to ensure that the use of the effect.
3. Control panel and piping airtightness
The control panel of the fresh air system is a relatively sophisticated electrical component, long-term use will adsorb dust, gathering moisture, which can easily lead to control panel failure or component damage. The piping of the fresh air system is due to the vibration of the fresh air machine and other reasons, the connection is easy to crack after a long time of use, the phenomenon of air leakage. This situation also needs to be checked by a professional, timely repair and improve the effect of fresh air operation.
4. Check the terminal board and power line
A long time after the use of the fresh air system may be due to the vibration of the fresh air machine leading to the terminal board terminal loose and producing safety hazards, the need for regular inspection by professionals, and timely solutions to the hidden safety hazards.
5. Duct cleaning
If the central air system, in addition to the filter, but also pipeline cleaning, is difficult, and high cost, manufacturers need to send professionals to regularly clean and replace the filter, and the user is not recommended to clean up privately. Home users are recommended to choose a wall-mounted air system, both to achieve the central air system ventilation function, the later replacement of filters and maintenance is also relatively simple, the living room and bedroom were installed, and can be used independently.
How to clean the fresh air system?
1. Magnetisation and anti-scaling treatment
The principle of magnetization and anti-scaling treatment of the fresh air conditioner is to use the polarity of water molecules, i.e. water molecules are covalent chemistry. The individual molecules of water by the role of polarity and hydrogen bonding, when the water flows through the high-intensity magnetic field, after the water of the multi-molecule associations and ionic magnetic field, the original single dispersed multi-ionic composition of the associations were disassembled into a single or short bonded associations.
Which cuts the external magnetic field at a certain speed perpendicular to the magnetic lines of force and produces induced currents. Therefore, each ion according to the same direction as the external magnetic field to establish a new magnetic field, adjacent ion molecules with polarity, the order of mutual compression and attraction, which leads to a change in the crystallization conditions, the formation of the crystalline material is very flaccid, compressive, tensile ability is poor and is very brittle, and its bonding and adhesion is very weak, they are not easy to attach to the heated surface to form scale.
2. Add medicine to soften the treatment
Dosing softening treatment, with a simple method, high efficiency, good economy, and does not need special water-making equipment and other characteristics, is a practical and strong anti-scaling water treatment method.
3. Lon bar anti-scaling water treatment
Ion bar anti-scaling water treatment is an emerging, advanced water treatment equipment. In the hot water circulation system, central air-conditioning system, and the application of circulating cooling water system, have achieved satisfactory anti-scaling effect.
Precautions for the use of fresh air system
The dust collection filter of the fresh air system, the middle-effect filter, and high-efficiency HEPA are required to be maintained regularly, because the daily operation of the fresh air system, due to electrostatic reasons, in the filter, for a long time, easy to adsorb dust, and in the long term easily caused by bacteria, resulting in a decline in air quality, affecting the life of the fresh air system and other hazards.
The fresh air system was upgraded, with a humane child lock, to avoid children touching. Most parents are worried about the installation of the fresh air system, the child will be on top of the chaotic press, set up the screen for this child lock, the operation method: click the screen settings button, inside the child lock, open for one minute without any operation, automatically lock the screen, in the touch screen does not respond to the use of the touch, want to use the touch, you need to enter the child lock password before you can enter.
When you rest at night you can set the fresh air system off-screen mode. Fresh air machine control panel off-screen operation, the machine is installed in the room, and the screen has been bright, affecting sleep, how to make the screen black? Does not affect the rest? Touch the Setup button, enter and point to the backlight settings, and then point to the timed screen off / screen on settings. Turn on the timer to rest/light the screen, and set your own sleep time, save the time after the screen becomes black, the machine runs normally.
When no one is home during the day, you can use the fresh air conditioner timer switch to reduce the use of filter life, as well as power consumption.
The detector needs to be placed in a place with a power source, kept always powered (no power can not be connected to the machine, and mobile phones can not be operated), and try not to be placed on the side of the bin (affecting the data, the home to open the humidifier when the detector data will also rise).